RE: [Help] Dialer-watch problem

From: jatinder.p.singh@bt.com
Date: Sun Oct 26 2003 - 07:10:34 GMT-3


Dear Alec,
 
You have not configured Dialer-group command on BRI interface..
 
Regards
 
J P Singh

        -----Original Message-----
        From: Alec [mailto:clapun@graduate.hku.hk]
        Sent: Sun 26/10/2003 07:36
        To: ccielab@groupstudy.com
        Cc:
        Subject: [Help] Dialer-watch problem
        
        

        My DDR configuration works before, but suddenly fails. Debug dialer shows
        the dialing stops just before resolving the dialer string.
        
        Have anyone seen it before ? Thanks.
        
        Below is my configuration and debug log
        
        hostname R5
        username R6 password 0 nmc
        isdn switch-type basic-net3
        interface Serial1
         ip address 172.16.123.2 255.255.255.0
         encapsulation frame-relay
         ip ospf network broadcast
         frame-relay map ip 172.16.123.1 101 broadcast
         no frame-relay inverse-arp
        !
        interface BRI0
         ip address 172.16.12.2 255.255.255.0
         encapsulation ppp
         dialer map ip 172.16.10.0 name R6 broadcast 4930622
         dialer map ip 172.16.12.1 name R6 broadcast 4930622
         dialer watch-group 1
         isdn switch-type basic-net3
         isdn spid1 81049306240101 4930624
         isdn spid2 81049306250101 4930625
         cdapi buffers regular 0
         cdapi buffers raw 0
         cdapi buffers large 0
         ppp authentication chap
        !
        router ospf 1
         log-adjacency-changes
         network 172.16.0.0 0.0.255.255 area 0
        !
        access-list 101 deny ospf any any
        access-list 101 permit ip any any
        dialer watch-list 1 ip 172.16.10.0 255.255.255.0
        dialer-list 1 protocol ip list 101
        !
        
        
        
        R5(config-if)#
        02:37:39: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
        02:37:39: BR0:1 DDR: disconnecting call
        02:37:39: DDR: Dialer Watch: watch-group = 1
        02:37:39: DDR: network 172.16.10.0/255.255.255.0 DOWN,
        02:37:39: DDR: primary DOWN
        02:37:39: DDR: Dialer Watch: Dial Reason: Secondary of group 1 DOWN
        02:37:39: DDR: Dialer Watch: watch-group = 1,
        02:37:39: DDR: dialing secondary by dialer map 172.16.10.0 on BR0
        02:37:39: DDR: Dialer Watch: dialer watch group already set on BR0 to 1
        02:37:39: BR0 DDR: Attempting to dial 4930622
        02:37:39: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
        02:37:39: BR0:2 DDR: disconnecting call
        02:37:39: DDR: Dialer Watch: watch-group = 1
        02:37:39: DDR: network 172.16.10.0/255.255.255.0 DOWN,
        02:37:39: DDR: primary DOWN
        02:37:39: DDR: Dialer Watch: Dial Reason: Secondary of group 1 DOWN
        02:37:39: DDR: Dialer Watch: watch-group = 1,
        02:37:39: DDR: Dialer Watch: watch-group = 1
        02:37:39: DDR: network 172.16.10.0/255.255.255.0 DOWN,
        02:37:39: DDR: primary DOWN
        02:37:39: DDR: Dialer Watch: Dial Reason: Secondary of group 1 DOWN
        02:37:39: DDR: Dialer Watch: watch-group = 1,
        02:37:39: DDR: Dialer Watch: watch-group = 1
        02:37:39: DDR: network 172.16.10.0/255.255.255.0 DOWN,
        02:37:39: DDR: primary DOWN
        02:37:39: DDR: Dialer Watch: Dial Reason: Secondary of group 1 DOWN
        02:37:39: DDR: Dialer Watch: watch-group = 1,
        02:37:39: %LINK-3-UPDOWN: Interface BRI0, changed state to up
        02:37:39: DDR: Dialer Watch: watch-group = 1
        02:37:39: DDR: network 172.16.10.0/255.255.255.0 DOWN,
        02:37:39: DDR: primary DOWN
        02:37:39: DDR: Dialer Watch: Dial Reason: Secondary of group 1 DOWN
        02:37:39: DDR: Dialer Watch: watch-group = 1,
        02:37:39: DDR: Dialer Watch: watch-group = 1
        02:37:39: DDR: network 172.16.10.0/255.255.255.0 DOWN,
        02:37:39: DDR: primary DOWN
        02:37:39: DDR: Dialer Watch: Dial Reason: Secondary of group 1 DOWN
        02:37:39: DDR: Dialer Watch: watch-group = 1,
        02:37:40: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
        02:37:40: BRI0:1: Expired call id received. id = 0x8010
        02:37:40: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
        02:37:40: BR0:1 DDR: disconnecting call
        02:37:40: DDR: Dialer Watch: watch-group = 1
        02:37:40: DDR: network 172.16.10.0/255.255.255.0 DOWN,
        02:37:40: DDR: primary DOWN
        02:37:40: DDR: Dialer Watch: Dial Reason: Secondary of group 1 DOWN
        02:37:40: DDR: Dialer Watch: watch-group = 1, ^Z
        R5#
        
        _______________________________________________________________________
        Please help support GroupStudy by purchasing your study materials from:
        http://shop.groupstudy.com
        
        Subscription information may be found at:
        http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:08 GMT-3