From: David Deng (glend_99@yahoo.com)
Date: Sat Oct 25 2003 - 20:17:38 GMT-3
Brian,
Thanks for reply.
I did have the command on the virtual-template and it
did not make any difference for me. So I decided to
ask for help...
r9#sh run int virtual-te 1
Building configuration...
Current configuration : 81 bytes
!
interface Virtual-Template1
ip unnumbered ATM0.3
no peer neighbor-route
end
Thanks,
David
--- Brian Dennis <bdennis@internetworkexpert.com>
wrote:
> Did you try "no peer neighbor-route"? I'm assuming
> you are using PPP since
> you mentioned a virtual-access interface.
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> David Deng
> Sent: Friday, October 24, 2003 9:24 PM
> To: David Deng
> Cc: ccielab@groupstudy.com
> Subject: Re: remove the /32 host route for PPPOA
> virtual Access int
>
> Missing some information here.
>
> The routers are running Eigrp.
> They saw each other interface as /32.
>
> Regards,
> David
>
> two routers are
> --- David Deng <glend_99@yahoo.com> wrote:
> > Hello there,
> >
> > Does anyone knows how to remove the /32 host route
> > caused by the virtual-access ?
> >
> > TIA,
> > David
> >
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Shopping - with improved product
> > search
> > http://shopping.yahoo.com
> >
> >
>
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:08 GMT-3