From: Larry Letterman (lletterm@cisco.com)
Date: Fri Oct 24 2003 - 03:58:48 GMT-3
So what are you expecting to see..vtp and vlan data is for L2
Interfaces, not L3..
Larry Letterman
Cisco Systems
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Paul Chen
Sent: Thursday, October 23, 2003 10:45 PM
To: ccielab@groupstudy.com
Subject: cat 3550 - layer 3 etherchannel, vtp
Hi,
I have 2 cat 3550 switches connected via a layer 3 etherchannel. Cat 1
is a vtp server and Cat 2 is a vtp client.
Q1. Changes in Cat 1's vlan configs does not propagate to Cat 2 ( Vtp
client ) for layer 3 etherchannel ?
It works for layer 2 etherchannel though. I am running 12.1(14)
Any help appreciated.
Cat 1:
interface Port-channel1
no switchport
ip address 140.4.21.1 255.255.255.252
interface FastEthernet0/23
no switchport
no ip address
channel-group 1 mode desirable
!
interface FastEthernet0/24
no switchport
no ip address
channel-group 1 mode desirable
Cat 2:
interface Port-channel1
no switchport
ip address 140.4.21.2 255.255.255.252
interface FastEthernet0/23
no switchport
no ip address
channel-group 1 mode desirable
!
interface FastEthernet0/24
no switchport
no ip address
channel-group 1 mode desirable
Thanks,
Paul
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:07 GMT-3