From: Danny.Andaluz@triaton-na.com
Date: Wed Oct 22 2003 - 00:07:01 GMT-3
Here is a portion of the config:
voice-port 2/0
!
voice-port 2/1
no non-linear
timeouts ringing infinity
!
dial-peer voice 10 pots
destination-pattern 7711
port 2/0
!
dial-peer voice 30 pots
preference 1
destination-pattern 7711
port 2/1
!
dial-peer voice 40 voip
destination-pattern 4411
session target ipv4:138.10.40.14
ip precedence 5
!
!
-----Original Message-----
From: asadovnikov [mailto:asadovnikov@comcast.net]
Sent: Tuesday, October 21, 2003 10:57 PM
To: Andaluz, Danilo, Triaton/NA; ccielab@groupstudy.com
Subject: RE: Preference under the Dial-Peers
Can you post a fragment of configuration
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Danny.Andaluz@triaton-na.com
Sent: Tuesday, October 21, 2003 10:52 PM
To: ccielab@groupstudy.com
Subject: Preference under the Dial-Peers
Hey, Group. My understanding of the preference command under the dial-peers
is that if the first phone is busy, the second phone, configured for the
same destination-pattern and a preference of 1, will ring. I am testing
this and it is not working. Is something else needed to make this work?
Thanks,
Danny
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:06 GMT-3