From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue Oct 21 2003 - 15:45:43 GMT-3
Try changing it to "show running-config". "show running-configuration"
is not a valid command.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Danny.Andaluz@triaton-na.com
Sent: Tuesday, October 21, 2003 11:17 AM
To: ccielab@groupstudy.com
Subject: Privilege Level Command
Hey Group,
privilege exec level 14 show running-configuration
username danny privilege 14 password 0 cisco
How does the above privilege command NOT allow this user to issue this
command. I would think that using this privilege command makes "show
run" a level 14 command. However, it doesn't let me issue the command
when I login with username danny. Any ideas?
Thanks,
Danny
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:05 GMT-3