From: Stuart Reabow (stuartbr@hotmail.com)
Date: Tue Oct 21 2003 - 09:20:26 GMT-3
Thanks, this works fine. Although it is missing from the 2500's.
----- Original Message -----
From: "Jason Viera" <jasonviera@avenuecable.com>
To: "Stuart Reabow" <stuartbr@hotmail.com>; <ccielab@groupstudy.com>
Sent: Tuesday, October 21, 2003 11:34 AM
Subject: Re: Ping script
> This should work depending on the IOS version(12.2) and router model (I
know
> it works on 2600 and 3600's):
>
> tclsh
> foreach pl {
> 172.16.10.1
> 172.16.80.8
> } {ping $pl}
>
> If not you can change the Hyperterminal settings (TCLSH is much faster!!):
> File
> Properties
> Settings
> ASCII Setup
> Line Delay (increase this time)
> Character Delay (increase this time)
>
> I'm sure there are many other ways to manipulate the Telnet software you
are
> using but I would have to say that the TCLSH works great especially in the
> lab!!
> HTH Jason
> ----- Original Message -----
> From: "Stuart Reabow" <stuartbr@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, October 21, 2003 2:19 AM
> Subject: Ping script
>
>
> > Hi,
> >
> > Does anyone know how to run a script on a router to ping ip's. I've seen
> this
> > somewhere before , but can't seem find it now.
> >
> > Thanks
> >
> > Stuart
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:05 GMT-3