RE: Voice preference default value

From: asadovnikov (asadovnikov@comcast.net)
Date: Fri Oct 17 2003 - 21:56:36 GMT-3


From the output provide in the previous email "preference=0" which is the
default preference, also can check command reference.

Best regards,
Alexei

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Friday, October 17, 2003 12:04 PM
To: Vazman@aol.com; ccielab@groupstudy.com
Subject: Re: Voice preference default value

I don't know the default value but use the following on a dial peer that has
no preference set and you'll see:

  a.. Enter the show dial-peer voice command to learn whether the COR list
fields are set as desired on a dial peer: Router# show dial-peer voice 210

VoiceEncapPeer210
        information type = voice,
        tag = 210, destination-pattern = \Q221',
        answer-address = \Q', preference=0,
        numbering Type = \Qunknown'
        group = 210, Admin state is up, Operation state is up,
        incoming called-number = \Q221', connections/maximum = 4/unlimited,
        DTMF Relay = disabled,
        Modem = system passthrough ,
        huntstop = disabled,
        application associated:
        permission :both
        incoming COR list:maximum capability
        outgoing COR list:minimum requirement
        type = pots, prefix = \Q221',
        forward-digits default
        session-target = \Q', voice-port = \Q1/0/8:D',
        direct-inward-dial = enabled,
        digit_strip = enabled,
----- Original Message -----
From: <Vazman@aol.com>
To: <ccielab@groupstudy.com>
Sent: Friday, October 17, 2003 2:01 AM
Subject: Voice preference default value

> Hello,
>
> Anyone knows what is the default preference for a dial peer? If you
> have two
dial peers with the same destination pattern and preference 1 and 2, the
dial peer with preference 1 will be used first.
>
> But if you have two dial peers with, one with no preference set and
> the
other with a preference of 1, which one will be used? I could not find it on
the DocCD or in the archives and dont have voice in my lab to test.
>
> Thanks,
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:04 GMT-3