RE: ISDN Switch Type

From: Kelley, Alan (kelleya@telecomsys.com)
Date: Tue Oct 14 2003 - 12:15:52 GMT-3

I believe under the ISDN Interface you can use the following:
 
isdn switch-type auto
 
Or something similiar to this. Use the Question mark?????

        -----Original Message-----
        From: Jung, Jin [mailto:jin.jung@lmco.com]
        Sent: Tue 10/14/2003 8:23 AM
        To: 'Stuart Reabow'; iwan; ccielab@groupstudy.com
        Cc:
        Subject: RE: ISDN Switch Type
        
        

        Hold for second, I believe there is a command, stuart.
        I just can not remember at this time.
        
        Friend of mind ordered ISDN from sprint but sprint did not
provide switch
        type so he had to figure it out him self.
        
        I can not remember what that command or debug was and I do not
have rack at
        work.
        
        Let me get back to you on that.
        
        Jin jung...
        CCIE#12368
        
        
        
        
        -----Original Message-----
        From: Stuart Reabow [mailto:stuartbr@hotmail.com]
        Sent: Tuesday, October 14, 2003 8:10 AM
        To: iwan; ccielab@groupstudy.com
        Subject: Re: ISDN Switch Type
        
        
        Iwan,
        
        I was looking for any type of command that will tell you what
switch type
        the router is connected to, regardless of the router config.
I'm guessing
        there is no command to do that, but thought I'd ask anyway.
        
        Stuart
        
        ----- Original Message -----
        From: "iwan" <iwan@i-lusion.nl>
        To: "Stuart Reabow" <stuartbr@hotmail.com>;
<ccielab@groupstudy.com>
        Sent: Tuesday, October 14, 2003 12:17 PM
        Subject: RE: ISDN Switch Type
        
        
> Do you mean the switchtype that is allready configured on an
Router?
> or do you mean in general just for the countries?
>
> For a router jut do a "sh run conf"
>
> For the other look here....
>
> http://www.cisco.com/warp/public/129/10.html
>
> Bye
>
>
>
> Iwan Hoogendoorn
> MCSA,MCSE, MCDBA, CCA, CCNA,
>
> ________________________________
>
> From: nobody@groupstudy.com on behalf of Stuart Reabow
> Sent: Tue 14-10-2003 10:18
> To: ccielab@groupstudy.com
> Subject: ISDN Switch Type
>
>
>
> Hi All,
>
> Is there any way to detect the ISDN switch type?
>
> Stuart
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
>

This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:01 GMT-3