From: Ken.Farrington@barclayscapital.com
Date: Sun Oct 12 2003 - 15:01:59 GMT-3
Guys,
ip ospf-demand cct needs only be configured on one side (the dialing side)
of an ISDN point-to-point connection correct?
Please can a regular OSPF user confirm this point.
Many thx
on the CD :-
If the router is part of a point-to-point topology, then only one end of the
demand circuit must be configured with this command. However, all routers
must have this
feature loaded.
If the router is part of a point-to-multipoint topology, only the multipoint
end must be configured with this command.
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:00 GMT-3