From: Ken.Farrington@barclayscapital.com
Date: Sun Oct 12 2003 - 08:11:23 GMT-3
Actually, just found out that this is required on the router being called
for the L2->l3 enacsultation, otherwise, without it, IP wont work :)
-----Original Message-----
From: Ken.Farrington@barclayscapital.com
[mailto:Ken.Farrington@barclayscapital.com]
Sent: 12 October 2003 11:11
To: ccielab@groupstudy.com
Subject: ISDN DIALER MAP command (with the name rtrname) option
Guys,
Please can you confirm that this command is not used for any authentication
protocol is PAP or CHAP for password authentication.
I understand this, to be a command within the dialer map command that is
used with CHAP only to look at the routers already connected via an ISDN.
Do I need this command if not running CHAP and even if I am running CHAP?
Many thx
Ken
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:00 GMT-3