From: John Smith (c00per_omers1@yahoo.com)
Date: Fri Oct 10 2003 - 02:11:22 GMT-3
"Barman, Partha" <PBarman@necbns.com> wrote:Hi Guys,
I have a 4507 switch with 48 port inline power module. One port is giving me
problem, fa7/13. The phone gets the power for sometime, and then the power
goes off, then on again. between power transitions, I get the below error
messages. Anybody seen it before. I also didnot find a CCO document on the
debug ilpower command, anyone know of any link in CCO for that command.
Thanks !
DAY-SW-10-4507#debug ilpower ?
port ILPOWER port management
registries ILPOWER registries
scp ILPOWER SCP messages
DAY-SW-10-4507#debug ilpower reg
ILPOWER registries debugging is on
DAY-SW-10-4507#debug ilpower scp
ILPOWER SCP messages debugging is on
DAY-SW-10-4507#SH POWER INLINE fa7/13
Interface Admin Oper Power Device
(Watts)
---------- ----- ---------- ------- -------------------
Fa7/13 auto on 7.0 cisco phone device
13w6d: ilpower_pd_statechange( Fa7/13 ) pd_class: 0
13w6d: ilpower_powerchange( Fa7/13 ) power: 7000
13w6d: ilpower_pd_statechange( Fa7/13 ) pd_class: 2
13w6d: ilpower_powerchange( Fa7/13 ) power: 0
13w6d: ilpower_pd_statechange( Fa7/13 ) pd_class: 0
13w6d: ilpower_powerchange( Fa7/13 ) power: 7000
13w6d: ilpower_pd_statechange( Fa7/13 ) pd_class: 2
13w6d: ilpower_powerchange( Fa7/13 ) power: 0
13w6d: ilpower_pd_statechange( Fa7/13 ) pd_class: 0
DAY-SW-10-4507#SH POWER INLINE fa7/13
Interface Admin Oper Power Device
(Watts)
---------- ----- ---------- ------- -------------------
Fa7/13 auto off 0 unknown
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:59 GMT-3