From: Ken.Farrington@barclayscapital.com
Date: Thu Oct 09 2003 - 16:20:14 GMT-3
Good evening all,
Just reading the cisco config and doyle 2 (page 741) and I still can get the
difference between these two values.
Vol2 says "The delta or absolute keywords specify whether the alarm will
test the change in MIB values over the specified interval OR the actual MIB
value"
Can some post an example to clarify this?
Maybe im whacked out :(
----------------------exmples------------------------------
R1(config)#rmon alarm 1 ken 30 ?
absolute Test each sample directly
delta Test delta between samples
R1(config)#rmon alarm 1 ken 30
delta
Tests the change between MIB variables, which affects the alarmSampleType in
the alarmTable of the RMON MIB.
absolute
Tests each MIB variable directly, which affects the alarmSampleType in the
alarmTable of the RMON MIB.
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:59 GMT-3