From: Snow, Tim (timothy.snow@eds.com)
Date: Tue Oct 07 2003 - 03:48:57 GMT-3
default-router
To specify the default router list for a Dynamic Host Configuration Protocol
(DHCP) client, use the default-router DHCP pool configuration command. To
remove the default router list, use the no form of this command.
default-router address [address2...address8]
The IP address of the router should be on the same subnet as the client
subnet. You can specify up to eight routers in the list. Routers are listed
in order of preference (address1 is the most preferred router, address2 is
the next most preferred router, and so on).
Tim
-----Original Message-----
From: Peng Zheng [mailto:zpnist@yahoo.com]
Sent: Tuesday, October 07, 2003 1:32 AM
To: ccielab@groupstudy.com
Subject: DHCP backup router
How to setup a backup default router in DHCP? Is
default-router default_router_IP backup_router_IP
enough?
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:58 GMT-3