From: Snow, Tim (timothy.snow@eds.com)
Date: Tue Oct 07 2003 - 02:24:31 GMT-3
R4#debug ip packet d
IP packet debugging is on (detailed)
R4#
R4#
R4#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R4(config)#int lo0
R4(config-if)#ip address 4.4.4.4 255.255.255.255
R4(config-if)#router eigrp 100
R4(config-router)#network 4.4.4.0 0.0.0.255
R4(config-router)#
11:13:19: IP: s=4.4.4.4 (local), d=224.0.0.10 (Loopback0), len 60, sending
broad
/multicast, proto=88
11:13:19: IP: s=4.4.4.4 (Loopback0), d=224.0.0.10, len 60, rcvd 2, proto=88
R4(config-router)#
R4(config-router)#
11:13:23: IP: s=4.4.4.4 (local), d=224.0.0.10 (Loopback0), len 60, sending
broad
/multicast, proto=88
Yep
Tim
#12042
-----Original Message-----
From: Peng Zheng [mailto:zpnist@yahoo.com]
Sent: Tuesday, October 07, 2003 1:00 AM
To: ccielab@groupstudy.com
Subject: eigrp config for loopback
When I configure eigrp for loopback, will EIGRP
updates be sent out the loopback interface?
If I'm asked to not send eigrp updates out loopback,
do I need to use passive loopback under eigrp process?
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:58 GMT-3