From: Marco Umer (m.umer@libero.it)
Date: Sun Oct 05 2003 - 06:58:42 GMT-3
Thank you Brian,
I found it, do you have any idea why it was removed? Is not suggested to use
it or is there any better way to implement the dialer-list for ISIS?
Marco
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Brian Dennis
Sent: Saturday, October 04, 2003 9:06 PM
To: 'Marco Umer'; 'Lab'
Subject: RE: ISIS over isdn
It was just removed from the help. Type the command out and it will take.
Rack1R5(config)#dialer-list 1 protocol ?
bridge Bridging
clns OSI Connectionless Network Service
decnet DECnet
ip IP
ipv6 IPv6
ipx Novell IPX
llc2 LLC2
netbios NETBIOS
Rack1R5(config)#dialer-list 1 protocol clns_is ?
% Unrecognized command
Rack1R5(config)#dialer-list 1 protocol clns_is permit
Rack1R5(config)#^Z
Rack1R5#sho run | in dialer-list
dialer-list 1 protocol clns_is permit
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Marco Umer
Sent: Saturday, October 04, 2003 7:08 AM
To: Lab
Subject: ISIS over isdn
Hi all,
I have a problem to enable isis over a ddr isdn interface that it could be
interesting for somebody else.
I was used to do it using "dialer x protocol clns_is" but it isn't available
anymore in IOS 12.2T and 12.3 and I am not able to trigger the dialer.
Using "dialer x protocol clns" doesn't work.
I know that this is the problem because the debug dialer packet says:
05:06:38: BR0/0 DDR: clns_is, 1499 bytes, outgoing uninteresting (no list
matched)
I would really appreciate any suggestion.
Thank you in advance
Marco
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:57 GMT-3