changing the source of the ICMP

From: MADMAN (dmadlan@qwest.com)
Date: Thu Oct 02 2003 - 16:48:57 GMT-3

• Next message: Roberts, Larry: "RE: ST & SC Fiber Connections"
• Previous message: Richard L. Pickard: "ip prefix-list"
• Next in thread: Brian Dennis: "RE: changing the source of the ICMP"
• Maybe reply: Brian Dennis: "RE: changing the source of the ICMP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   Had a question posed today that I don't think can be done but thought
I would pose it to this list. I don't think you can.

   On a router you can change the source interface to a predetermined ip
address when telnetng from the router, "ip telnet source-interface
x.x.x.x"

   Is there a way to do the same for ICMP with a global configuration so
one doesn't have to always go thru the extended ping?

   Thanks

   Dave

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367
"Emotion should reflect reason not guide it"
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***

• Next message: Roberts, Larry: "RE: ST & SC Fiber Connections"
• Previous message: Richard L. Pickard: "ip prefix-list"
• Next in thread: Brian Dennis: "RE: changing the source of the ICMP"
• Maybe reply: Brian Dennis: "RE: changing the source of the ICMP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:56 GMT-3