From: fred@ranking-t.com
Date: Thu Oct 02 2003 - 10:06:47 GMT-3
Hi Guru,
I have a case study question that could occur on a CCIE scenario.
Connecting a lab equipement to Terminal Server vlan, What could be the
cause of losing the connection to all equipment into the lab in reverse
telnet?
Posible assumptions:
a) If the lab device you connect is no-auto capable and the port L2 switch
(where the TS is attached too) is configured in auto/
b) Can bad Etherchannel configuration on the lab switch influence the TS
port in shutting (errDisable Port) it down?
c)Or what would be the troubeshooting methodology knowing there is no
access to the TS port console during this time.
Very much appreciate your help.
Cheers, Fred.
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:55 GMT-3