From: Carter, Lee (Lee.Carter@CommerceBank.com)
Date: Tue Sep 30 2003 - 14:35:48 GMT-3
Yes, I work at a bank with 100's of ATM's. We don't direct traffic to an
AS400 but rather to a CIP that dumps it on to the Token Ring for the
Mainframe (authentication and all that).
You will need to look into DLSw as the best solution. You could bridge from
the ATM all the way to the AS400 but that is more work and you have less
flexibility.
-----Original Message-----
From: anant moreshwar chakole [mailto:anantmc@rediffmail.com]
Sent: Tuesday, September 30, 2003 2:48 AM
To: ccielab@groupstudy.com
Subject:
Hi group
Does any body knows the solution or how to configure the cisco
router for the following scenario.
ATM Machine----Cisco Router---L.L.---Cisco Router---L.L---SNA
Server
| |
| |
Switch Switch
| |
| |
Lacal Lan Unix Server
Now my data from ATM Machines will come to the Unix server and
after some processing it will pump the data to the AS400 server
for the ATM user authentication . In this case the AS400 server
will work on serial interface only.
Thanking you in anticipation
Best Regards
Anant
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:40 GMT-3