From: Scott Morris (swm@emanon.com)
Date: Tue Sep 30 2003 - 11:39:45 GMT-3
Assuming you mean dot1q. :)
Otherwise, you're right. If you do not specify a particular "switchport
mode" command, you can allow the desireable/auto/whatever configuration
to take effect. And therefore move to trunk or move to access vlan will
be dependent on negotiation.
Use "switchport mode dynamic desireable" to allow negotiation. Set your
trunk encapsulation then, and set your access vlan then. If it can
trunk, it will, if not, it will use the access vlan specified.
If your trunk is set using the "switchport mode trunk" then it will move
everything in encapsulated dot1q trunk. By changing the native vlan,
you are specifying which vlan frames will be sent untagged. I haven't
actually specifically tried running this, but in theory (in my feeble
mind) it would work. Because the trunk really just sends tagged or
untagged items. And if something isn't tagged, it must be on that vlan.
I think your solution is the more sane of the two. IMHO.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kenneth Wygand
Sent: Tuesday, September 30, 2003 9:35 AM
To: ccielab@groupstudy.com
Subject: Native-VLAN vs. Switchport Access VLAN
Hello group,
I have two (2) 3550's with an ISL trunk between them on FastEthernet0/10
(both sides).
I have a practice lab question that states "If the trunk encapsulation
should fail, ensure that VLAN 568 is still forwarded across the link".
My thought was to set the trunk mode to DESIRABLE on both sides and
include a "switchport access vlan 568" command on the interface in the
case when the trunk does not establish. However, the answer key states
that the trunk is nailed down on both sides (switchport mode trunk) and
the native-vlan is set to 568 on both sides (switchport trunk native
vlan 568).
Which is right, or do both answers satisfy the requirements?
If these yield different results and a question like this is asked on
the lab exam, what question could we ask of the proctor to determine
which configuration is correct?
Thanks,
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, MCP 2000, CNA 5.1, Network+, A+ Custom
Computer Specialists, Inc. 70 Suffolk Court Hauppauge, NY 11788
(631) 864-6699 x1755
"It's not just about ending up where you want to be, it's about making
the most of the trip there." -Anonymous
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:40 GMT-3