From: Scott Morris (swm@emanon.com)
Date: Sat Sep 27 2003 - 15:52:41 GMT-3
Do a 'show dialer' and see if anything is being used... Mine was
removed without even taking stuff out.
interface Dialer1
ip unnumbered Loopback0
encapsulation ppp
dialer pool 1
dialer idle-timeout 86400
peer default ip address pool dialin
no fair-queue
ppp authentication chap callin
ppp multilink
!
3620-ISDN#conf t
Enter configuration commands, one per line. End with CNTL/Z.
3620-ISDN(config)#no int dialer 1
3620-ISDN(config)#
Di1 DDR: dialer shutdown complete
18w2d: %LINK-5-CHANGED: Interface Dialer1, changed state to
administratively down
3620-ISDN(config)#^Z
*shrug*
You could also shut the interfaces (ISDN) down, just to be sure
something isn't somehow stuck in the database. Short of that, reloading
is the only other way to really clear all of that out if something
really is stuck in that fashion. (IOS bug?)
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al. IPExpert CCIE Program Manager IPExpert Sr.
Technical Instructor swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Peng Zheng
Sent: Saturday, September 27, 2003 12:42 PM
To: Thomas Larus
Cc: ccielab@groupstudy.com
Subject: Re: can not remove dialer interface
I already remove dialer pool-member 1 from physical
ISDN interface, but I can not remove dialer pool 1
from dialer profile.
--- Thomas Larus <tlarus@cox.net> wrote:
> I am not sure, but try removing the "dialer pool 1"
> from under the dialer
> profile, and if that does not work, remove any
> dialer pool-related stuff
> from the physical ISDN interface, like the statement
> that puts the physical
> interface in a dialer pool.
>
>
> ----- Original Message -----
> From: "Peng Zheng" <zpnist@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, September 27, 2003 12:58 AM
> Subject: can not remove dialer interface
>
>
> > When I tried to remove dialer interface, I got:
> >
> > %Remove dialing ddb from profile first
> >
> > the only config in dialer interface is:
> >
> > interface Dialer1
> > no ip address
> > dialer pool 1
> >
> > what's the problem?
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Shopping - with improved product
> search
> > http://shopping.yahoo.com
> >
> > ***Get your CCIE and a FREE vacation:
> Shop.GroupStudy.com***
> >
>
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:38 GMT-3