From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue Sep 23 2003 - 20:06:57 GMT-3
The 2600's can do dot1q on a 10meg interface.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rob Laidlaw
Sent: Tuesday, September 23, 2003 4:01 PM
To: cisco@tsgi.net; ccielab@groupstudy.com
Subject: Re: Inter-Vlan router config
You have two choices from the bottom of the cisco product line. A cisco
1721 can do dot1q (not sure about isl) encapsulation so that will work
for
you or any 2600 with 1 fast ethernet interface (you need at least
100mbps
interface to do dot1q or isl so the 2500 series is out). Good luck
-Rob
----- Original Message -----
From: <cisco@tsgi.net>
To: <ccielab@groupstudy.com>
Sent: Tuesday, September 23, 2003 6:02 PM
Subject: Inter-Vlan router config
> Hi,
>
> What is the lowest price router that should be obtained to implement
Inter-VLAN configuration for
> CCIE lab.
> What model router should be purchased for home lab?
> Please advise.
>
> Darly Coupet
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
>
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:34 GMT-3