From: Scott Morris (swm@emanon.com)
Date: Tue Sep 23 2003 - 18:10:44 GMT-3
frame-relay map ip 10.10.10.10 201 broadcast rtp header-compression
you have the same 'passive' and 'connections' parameters you can add as
well.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net <http://www.ipexpert.net/>
-----Original Message-----
From: Annu Roopa [mailto:annu_roopa@yahoo.com]
Sent: Tuesday, September 23, 2003 4:38 PM
To: Scott Morris; 'Jeff Colburn'; ccielab@groupstudy.com
Subject: RE: RTP Header Compression
Scott,
How would we achieve the same thing if we were to do/have only RTP
compression without TCP compression. So let us say we need to have only
cRTP on the FR links without using TCP compression is it possible at all
?
Thanks,
Annu
Scott Morris <swm@emanon.com> wrote:
Within the frame-relay command set:
Frame-relay map ip 10.10.10.10 201 broadcast compress
That "compression" word will enable both TCP and RTP compression within
that particular DLCI. You can tag a "passive" word to the end which
will wait until it receives a compressed one to start itself. You can
also add a "connections (#)" to the end specifying the max number of
compressed connections.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jeff Colburn
Sent: Tuesday, September 23, 2003 10:30 AM
To: ccielab@groupstudy.com
Subject: RTP Header Compression
If I have a frame relay link between two routers (both using physical
interfaces), is it possible to configure RTP Header compression and
frame relay compression concurrently? If so, would you use payload
compression? I lose connectivity across the link whenever I attempt
this. Any thoughts on this would be appreciated.
Thanks,
Jeff
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:34 GMT-3