From: navaid@rogers.com
Date: Mon Sep 22 2003 - 22:38:22 GMT-3
Both R6 and R5 are connected to same ethernet segment.
EIGRP authentication is not working between R5 and R6. I have re-typed the key and interface config.
Following is config. I am not sure what is wrong can someone please help...
Navaid
-----------R6--------------------------
R6#sh run int e1
Building configuration...
Current configuration : 175 bytes
!
interface Ethernet1
ip address 140.10.101.6 255.255.255.0
ip authentication mode eigrp 101 md5
ip authentication key-chain eigrp 101 eigrpkey101
media-type 10BaseT
end
R6#sh key chain
Key-chain eigrpkey101:
key 1 -- text "ipexpert_101"
accept lifetime (always valid) - (always valid) [valid now]
send lifetime (always valid) - (always valid) [valid now]
Key-chain eigrpkey100:
key 1 -- text "ipexpert_100"
accept lifetime (always valid) - (always valid) [valid now]
send lifetime (always valid) - (always valid) [valid now]
--------------R5---------------------
R5#sh run int e0
Building configuration...
Current configuration : 155 bytes
!
interface Ethernet0
ip address 140.10.101.5 255.255.255.0
ip authentication mode eigrp 101 md5
ip authentication key-chain eigrp 101 eigrpkey101
end
R5#sh key chain
Key-chain eigrpkey100:
key 1 -- text "ipexpert_100"
accept lifetime (always valid) - (always valid) [valid now]
send lifetime (always valid) - (always valid) [valid now]
Key-chain eigrpkey101:
key 1 -- text "ipexpert_101"
accept lifetime (always valid) - (always valid) [valid now]
send lifetime (always valid) - (always valid) [valid now]
1
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:33 GMT-3