From: Vazman@aol.com
Date: Mon Sep 22 2003 - 15:08:37 GMT-3
R2-----FR----R5
| |
R1-| |- R4
Client-| |- Server
R3-----FR----R6
R1, R2 and R3 in OSPF area 20 (Totally stubby)
R4, R5 and R6 in OSPF area 0
R1, R2, R3 and Client are on same LAN Segment
R4, R5, R6 and Server are on same LAN Segment
Client uses R1 as default gateway
Server uses R4 as default gateway
Need to load-balance across both links.
R1 sees a default route from R2 and R3 via OSPF. Traffic from R1 to server is load balanced across both links. Verified this by turning on IP Accounting on R2 and R3. But traffic from client to server is going via one link only. I am using per-packet load balancing on R1 (E0).
Any suggestions would be very helpful?
Thanks,
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:33 GMT-3