From: R&S Groupstudy (rsg@synergy-networking.co.uk)
Date: Mon Sep 22 2003 - 11:45:17 GMT-3
this is not a problem.
when you get your router you configure the T1 controller with the number of
timeslots you get allocated
eg
controller T1 0/0
channel group 0 timeslots 1-4
etc etc etc - you can specify the line encoding, clocking etc here
when you type in this config, your router gets a new serial interface
eg
interface serial 0/0:0 !!!!the number after the colon: is the channel
group you defined above.
you can then encapsulate your serial interface in any way you like
eg interface serial 0/0:0
encapsulation ppp - or frame-relay or whatever
Adam
> -----Original Message-----
> From: Rajagopal S [SMTP:raj_ccie@yahoo.com]
> Sent: Monday, September 22, 2003 3:15 PM
> To: Kurt Kruegel; ccielab@groupstudy.com
> Subject: Re: Frame-relay with T1
>
> Hi Kurt,
>
> Thanks for the info.
>
> The doc only shows about configuring FR on an interface which has a V.35
> interface. There is a CSU-DSU which converts the T1 signals. But this is
> not my scenario.
>
> I have a router which has a direct T1 card and the T1 line coming from the
> DOT directly lands on the router without a CSU/DSU.
>
> As given below, a normal T1 link works fine end to end when we have the
> encapsulation as ppp. I wanted to know if it will work with FR.
>
> Cheers
> Raj
>
> Kurt Kruegel <kurt@cybernex.net> wrote:
> http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configurat
> ion_guide_chapter09186a0080080fdc.html
>
>
> ----- Original Message -----
> From: "Rajagopal S"
> To:
> Sent: Monday, September 22, 2003 6:53 AM
> Subject: Frame-relay with T1
>
>
> > Hi guys,
> >
> > Is FR possible with a T1 interface ? Am in India and never worked with a
> T1 interface. Is there any documentation for this ?
> >
> >
> > interface serial0/1
> >
> > no shutdown
> >
> > service-module t1 clock source line
> >
> > service-module t1 timeslots 1-4 speed 64
> >
> > service-module t1 framing esf
> >
> > service-module t1 linecode b8zs
> >
> > ip address 10.30.30.1 255.255.255.252
> >
> > encapsulation frame-relay
> >
> > frame-relay interface dlci 101
> >
> >
> >
> > Will this config work ?
> >
> >
> >
> > Cheers
> >
> > Raj
> >
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site design software
> >
> > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:33 GMT-3