From: Scott Morris (swm@emanon.com)
Date: Sat Sep 20 2003 - 11:52:52 GMT-3
I'm assuming that you want to know the matches for ethernet0 versus the
matches for serial0. The answer is that you don't. If you are using
the same ACL anyway.
Enter the same ACE line into two separate ACL's, apply one to the
ethernet and one to the serial and that will give you your
differentiation. At least in a summary basis.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
emad
Sent: Saturday, September 20, 2003 10:42 AM
To: ccielab@groupstudy.com
Subject: ACL matching interface
Folks,
If I have ACL configured on both interfaces (Ethernet and Serial) how
can I differentiate between the matching times in the access-list itself
(I mean which matching which interface or I need to know the matches for
serial away from matches for Ethernet) since I have only the command :
Sh ip access-list 130
In e0
Ip access-group 130 in
In s0
Ip access-group 130 in
Regards
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:32 GMT-3