From: MADMAN (dmadlan@qwest.com)
Date: Fri Sep 19 2003 - 16:22:46 GMT-3
Here is another, "I love the consistancy of IOS" switch related question.
Got a call today, the VLANs 54 and 55 in a 6509 running native mode
had the same 802.10 VLAN id which was causing SAID errors. I told the
tech to wipe out the vlan.dat file and reload the switch.
This did fix the problem. Question is where do you think the
vlan.dat file is located??
Dave
Winner is entitled to one free beer when in the Twin Cities ;)
Adam Crisp (synergy) wrote:
> maybe ;-)
>
> I just assumed it was a type becaus of the reference to ""interface vlan
>
>>XX" "
>
>
> cheers
>
>
>
>
>>-----Original Message-----
>>From: Volkov, Dmitry (IDS Canada) [SMTP:dmitry_volkov@ml.com]
>>Sent: Friday, September 19, 2003 5:02 PM
>>To: 'R&S Groupstudy'; 'qwerts2@email.com'
>>Cc: ccielab@groupstudy.com
>>Subject: RE: Switch related question 2
>>
>>Wasn't original question about CAT5000 ?
>>For CatOS:
>>If You have ports belonging to VLAN X and this vlan was cleared from
>>database, ports get "inactive" status.
>>If You re-create Vlan X ports become notconnected/connected
>>
>>
>>>-----Original Message-----
>>>From: R&S Groupstudy [mailto:rsg@synergy-networking.co.uk]
>>>Sent: Friday, September 19, 2003 9:50 AM
>>>To: 'qwerts2@email.com'; ccielab@groupstudy.com
>>>Subject: RE: Switch related question 2
>>>
>>>
>>>if you have ports on the switch that have been put in to a
>>>certain vlan -
>>>say vlan 10 and then vlan 10 is removed from the database,
>>>then the ports
>>>that were in vlan 10 become down,down.
>>>
>>>by typing in "interface vlan 10" you have effectivly added
>>>vlan 10 back into
>>>the vlan database and the ports will come back up again
>>>
>>>Adam
>>>
>>>
>>>>-----Original Message-----
>>>>From: qwerts2@email.com [SMTP:qwerts2@email.com]
>>>>Sent: Friday, September 19, 2003 1:36 PM
>>>>To: ccielab@groupstudy.com
>>>>Subject: Switch related question 2
>>>>
>>>>Hello group,
>>>> Wondering if anyone might have any thoughts or directions on a
>>>>CAT5000 retaining vlan information. When "interface vlan
>>>
>>>XX" was entered
>>>
>>>>specific ports became active at that moment. Seeking information to
>>>>further explain this. Not finding answer in switch bible, "Cisco Lan
>>>>Switching"
>>>>Any insight would be appreciate. Original question posted as "Switch
>>>>related question".
>>>>Thanks again Charles for your help in this matter, good
>>>
>>>suggestions and
>>>
>>>>help ruling things out.
>>>>Cheers,
>>>>Franklin Hall
>>>>
>>>>***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
>>>>
>>>
>>>______________________________________________________________
>>>_________
>>>
>>>>Please help support GroupStudy by purchasing your study
>>>
>>>materials from:
>>>
>>>>shop.groupstudy.com
>>>>
>>>>Subscription information may be found at:
>>>>http://www.groupstudy.com/list/CCIELab.html
>>>
>>>***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
>>>______________________________________________________________
>>>_________
>>>Please help support GroupStudy by purchasing your study
>>>materials from:
>>>shop.groupstudy.com
>>>
>>>Subscription information may be found at:
>>>http://www.groupstudy.com/list/CCIELab.html
>
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Emotion should reflect reason not guide it"
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:31 GMT-3