From: Scott Morris (swm@emanon.com)
Date: Thu Sep 18 2003 - 11:25:21 GMT-3
Is your cable good?
While I haven't had a 2507 in quite a while, I do have other hubs
plugged into a 3550 and they work just fine. Got one on a crossover
cable, and another with a straight-through (uplink port on hub). You're
correct on the 10-half setting though.
What do you see on the switch? Link light? Anything? Errors?
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Roger McNeace
Sent: Thursday, September 18, 2003 9:15 AM
To: 'ccielab@groupstudy.com'
Subject: Cisco 2507 with Hub ports to 3550 Switch
Does anyone know if it is possible to connect the hub ports on a 2507 to
a 3550 switch. I tried a crossover cable, setting the speed and duplex
speed to 10half on switch, setting swithport to routed port, but
nothing works. Hub ports only seem to work if directly plugged into
another router or PC.
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:30 GMT-3