From: navaid@rogers.com
Date: Thu Sep 18 2003 - 01:06:54 GMT-3
Check following:
- Do "clear ip ospf process" on both routers.
- Double check subnet mask and IP.
- Make sure you can ping.
- "sh ip ospf interface" to check type of interface which should be NonBroadcast. Check hello time and other timing.
- Double check frame map ip statement. It should use broadcast.
- Remove authentication if you have it configured (from interface and also from router ospf if you have area x authenticaiton).
- Use "Debug IP ospf adj" for further troubleshooting.
Navaid
>
> From: "Kaiser Anwar" <kaiseranwar@sbcglobal.net>
> Date: 2003/09/18 Thu AM 12:42:47 EDT
> To: <ccielab@groupstudy.com>
> Subject: ospf neigbhor issue
>
> Hi,
> I have a simple about ospf NBMA multipoint interface. I have R1 connected
> to R3 with Frame relay map statements.
> I dont want to use ip ospf network staement. This is how i am doing, I dont
> know what i am missing.
> All I have on router 1 is network statement and on interface i have ip ospf
> priority 0 so it does not become BDR.
> R3 has nei statement for R1. This is what I get when using the show
> command. Thanks
>
>
>
> r3#o nei
>
> Neighbor ID Pri State Dead Time Address Interface
> N/A 0 ATTEMPT/DROTHER - 130.10.10.1 Serial0/0.1
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
1
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:30 GMT-3