From: beda jain (bpjain@cisco.com)
Date: Tue Sep 16 2003 - 10:17:07 GMT-3
Thanks,
Beda
At 08:39 PM 9/15/2003 -0400, Snow, Tim wrote:
>Beda,
>
>Since you were not the one that originally asked the question, how are you
>so sure that "you are not allwoed to change the number in port 2"
>
>Are you implying that this is a CCIE lab question and that was one of the
>restrictions. I hope not.
>
><gripe>
>I wish there were moderators of this list so that people could be kicked off
>for asking NDA questions or even just asking questions that they spent no
>time investigating
></gripe>
>
>Tim
>#12042
>
>-----Original Message-----
>From: beda jain [mailto:bpjain@cisco.com]
>Sent: Monday, September 15, 2003 8:47 AM
>To: m.m.jansen02@kpn.com; johntafasi@yahoo.com; ccielab@groupstudy.com
>Subject: RE: Voice challenge
>
>
>i think first one is the right answer
>you are not allowed to change the number in port 2
>
>Beda
>
>At 03:40 PM 9/15/2003 +0200, m.m.jansen02@kpn.com wrote:
> >All,
> >1
> >When i reread the q, expansion sounds good when there is another number
> >attached to that port 2. ie 55555
> >num-expansion 0 55555
> >
> >2
> >You also could just assign 0 to the second port.... ;-) as
> >destination-pattern port 1
> >dial peer pots
> >destination-pattern 11111
> >
> >port 2
> >dial peer pots
> >destination-pattern 0
> >
> >
> >Martijn
> >
> >
> >-----Oorspronkelijk bericht-----
> >Van: beda jain [mailto:bpjain@cisco.com]
> >Verzonden: maandag 15 september 2003 15:24
> >Aan: John Tafasi; ccielab
> >Onderwerp: Re: Voice challenge
> >
> >
> >i think num-expansion 0 xxxxx (second port.)
> >
> >if you dial form second port you will get busy, but you dila from port
> >1 it will go to port 2.
> >
> >Thanks
> >Beda
> >At 02:50 AM 9/15/2003 -0600, John Tafasi wrote:
> > >Hi Group,
> > >
> > >I have this scenario: Router A is a voice router with two FXS analoge
> > >voice ports, each port is connected to an analoge telephone. I would
> > >like to configure the router such that when the user connected to the
> > >first port dial 0, the call will go to the other user at the second
> > >port. How would
> >you
> > >configure that?
> > >
> > >
> > >John Tafasi
> > >
> > >***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > >_____________________________________________________________________
> > >__
> > >Please help support GroupStudy by purchasing your study materials from:
> > >shop.groupstudy.com
> > >
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> >***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> >_______________________________________________________________________
> >Please help support GroupStudy by purchasing your study materials from:
> >shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
>***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:28 GMT-3