From: navaid@rogers.com
Date: Sun Sep 14 2003 - 12:08:03 GMT-3
Jonathan,
Thanks for reply. It is now resolved.
I incorrectly typed "pvc 0/5 ilmi" and later corrected it with "pvc 0/5 qsaal". Even after correcting the pvc it was not working until I reloaded the router.
Thanks,
Naviad
>
> From: "Jonathan V Hays" <jhays@jtan.com>
> Date: 2003/09/14 Sun AM 11:03:51 EDT
> To: <navaid@rogers.com>, <ccielab@groupstudy.com>
> Subject: RE: atm svc
>
> Please post your configs.
>
> Jonathan
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> navaid@rogers.com
> Sent: Sunday, September 14, 2003 10:56 AM
> To: ccielab@groupstudy.com
> Subject: atm svc
>
>
> I would like to practice SVCs and enabled pvc 0/5 qsaal on router. But
> as soon as I enable it I receive following message:
> 00:27:46: %ATMSSCOP-4-UNMATCHUNIVERSION: (ATM0): rcv non-0 NUU in
> BeginPdu at UNI 3.0. Please verify peer UNI version
>
> I have found folloing description on the cisco website still not sure
> what the issue is:
> The ATM peer equipment may need attention. Verify that the version of
> ATM UNI is at least Version 3.1 and upgrade if necessary.
>
>
> 1
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
1
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:27 GMT-3