From: elpingu (elpingu@acedsl.com)
Date: Fri Sep 12 2003 - 22:29:39 GMT-3
by the way The fwsm doe not monitor WAN ports
elpingu wrote:
> Is there a method to firewall a wan interface with a FWSM using a
> flexwan
> I included a link from cisco they state any interface ..any interface
> mean wan aslso.
>
> here are some excerts from the product data sheet.
> http://www.cisco.com/en/US/products/hw/modules/ps2706/products_data_sheet09186a00800c4fe7.html
>
> Integrated Module
> Installed inside a Cisco Catalyst 6500 Series Switch or Cisco 7600
> Internet Router, the FWSM allows any port on the device to operate as a
> firewall port and integrates stateful firewall security inside the
> network infrastructure. This becomes especially important where rack
> space is at a premium. The Cisco Catalyst 6500 truly emerges as the IP
> services switch of choice for customers requiring intelligent services
> such as firewall services, intrusion detection, and virtual private
> networking (VPN), along with multilayer LAN, WAN, and MAN switching
> capabilities.
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:27 GMT-3