RE: custom queue with out byte-count

From: Danny.Andaluz@triaton-na.com
Date: Fri Sep 12 2003 - 13:33:03 GMT-3

• Next message: Charles Church: "RE: VTP and bridged interfaces on routers"
• Previous message: navaid@rogers.com: "custom queue with out byte-count"
• Maybe in reply to: navaid@rogers.com: "custom queue with out byte-count"
• Next in thread: navaid@rogers.com: "Re: RE: custom queue with out byte-count"
• Maybe reply: navaid@rogers.com: "Re: RE: custom queue with out byte-count"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Here you go:

http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_r/qrfcmd7.htm#1019349

Danny

-----Original Message-----
From: navaid@rogers.com [mailto:navaid@rogers.com]
Sent: Friday, September 12, 2003 12:22 PM
To: ccielab@groupstudy.com
Subject: custom queue with out byte-count

If queue-list is defined but no byte-count is specified what is the default for queue ? For example:

queue-list 1 protocol ip 1 tcp 443
queue-list 1 protocol ip 2 tcp 80
queue-list 1 default 3

(only above config with out any byte-count and limit)

Thanks,

Navaid

1

• Next message: Charles Church: "RE: VTP and bridged interfaces on routers"
• Previous message: navaid@rogers.com: "custom queue with out byte-count"
• Maybe in reply to: navaid@rogers.com: "custom queue with out byte-count"
• Next in thread: navaid@rogers.com: "Re: RE: custom queue with out byte-count"
• Maybe reply: navaid@rogers.com: "Re: RE: custom queue with out byte-count"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:27 GMT-3