From: Kaiser Anwar (Kaiser_anwar@hotmail.com)
Date: Fri Sep 12 2003 - 11:50:46 GMT-3
Just a note. this is just in a lab. This is a scenario I have R1 R2 and R3.
R1 and R3 is a client and R2 is a route reflector. all three routers have
IBGP sessions.
what I wanted to do is Not use the no sync command and no network command.
ospf is igp. I created a prefix list matched it with route map and
redistributed that into bgp with Redistrbute connected route-map name. same
network is also in IGP too. i was doing this in R3. On r3 it shows best
route
when i do show ip bgp. but in R2 it shows but says it is not synchronized.
Thanks
Kaiser A
----- Original Message -----
From: "Jihene Bouraoui" <bouraoui@globalknowledge.fr>
To: "'Kaiser Anwar'" <Kaiser_anwar@hotmail.com>
Sent: Friday, September 12, 2003 9:43 AM
Subject: RE: alternative bgp no sync command
> Route reflector, or bgp confederations
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Kaiser Anwar
> Sent: vendredi 12 septembre 2003 16:18
> To: ccielab@groupstudy.com
> Subject: alternative bgp no sync command
>
>
> Hi Group,
> I have a question about no sync command for bgp.I was doing
> a lab with three routers running IBGP. I did not have the No sync
> command.
> what would be the alternative to No sync for bgp. Thanks
>
>
> Kaiser A
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:26 GMT-3