From: Joseph Eleazar (joseph_eleazar@hotmail.com)
Date: Fri Sep 12 2003 - 03:07:32 GMT-3
There should be 2 bootrom chips, labeled FW1 and FW2 and they go in
particular locations. Maybe you put the chips in the opposite locations.
Try swapping the chips.
JoeE
>From: "n.donkoh" <n.donkoh@attbi.com>
>Reply-To: "n.donkoh" <n.donkoh@attbi.com>
>To: <ccielab@groupstudy.com>
>Subject: Console Date: Thu, 11 Sep 2003 13:45:04 -0500
>
>Hi,
>I'm wondering if there is anybody out there who has across this issue. I
>upgrade the bootrom of a 2509 access router and after reboot could not
>access the console. The only thing i get on the terminal emulator is a
>series of CCCCCCCCCCC. I have checked the baudrate etc to cisco specified
>values but still no luck. The initial bootstring does not even show up. Any
>ideas would be appreciated.
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:26 GMT-3