From: Jonathan V Hays (jhays@jtan.com)
Date: Tue Sep 09 2003 - 12:09:58 GMT-3
Now, now Tim. Be nice. ;) Everyone is a newbie at some point in their
lives. ;)
It is true that only the Doc CD will be available as a reference during
the lab test (hard copies are available also). However, if you spend
some time studying the Doc CD you will soon learn that the Configuration
Guides are generally not written at the level of a tutorial nor do they
give in-depth explanations like the whitepapers on CCO, although there
are some exceptions.
Learning how to resolve protocol interactions and the hundreds of hidden
gotchas is simply not covered on the Doc CD. You can learn these by
going through commercial third-party practice labs, taking training
classes, reading books, and reading groupstudy posts. A combination of
lots of hands-on experience and a ton of reading is required. The ratio
between the two and the total amount of time spent on each depends on
the individual.
The fact is that simply reading the Doc CD and practicing commands is
not enough to prepare you to pass the CCIE lab test. However, you had
better be very familiar with where to find most topics on the Doc CD,
unless you have a photographic memory.
HTH,
Jonathan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Snow, Tim
Sent: Tuesday, September 09, 2003 12:38 AM
To: 'Alfred Jr'; ccielab@groupstudy.com
Subject: RE: Doc CD
Yes, that's all you need to know. Memorize all 15 books at 500 pages a
piece
and you'll be all set.
Good luck.
Tim
-----Original Message-----
From: Alfred Jr [mailto:nior57@hotmail.com]
Sent: Tuesday, September 09, 2003 12:25 AM
To: ccielab@groupstudy.com
Subject: Doc CD
Guys,
Cisco specified that the Doc CD is where you can get all the possible
solutions to the LAB test, doesn't it mean that by studying the CD it
should
cover all your needs for the LAB?
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:26 GMT-3