From: Vlad Levytskyy (volodymyr.levytskyy@3web.net)
Date: Tue Sep 09 2003 - 14:18:22 GMT-3
But it's a multipoint....
only frame-relay map....
----- Original Message -----
From: "iwan" <iwan@i-lusion.nl>
To: "Vlad Levytskyy" <volodymyr.levytskyy@3web.net>;
<ccielab@groupstudy.com>
Sent: Tuesday, September 09, 2003 1:08 AM
Subject: RE: FRTS
> I would say just create a sepparate Serial subinterface and define that
other
> PVC in it.
>
> Or/and create multiple map-classes...
>
> Tell me if i am wrong
>
> Iwan Hoogendoorn
> MCSA,MCSE, MCDBA, CCA, CCNA, CCIE (Written)
> Tel : +31 6 47954616
> E-mail : iwan@i-lusion.nl
>
>
> ________________________________
>
> From: nobody@groupstudy.com on behalf of Vlad Levytskyy
> Sent: Tue 9/9/2003 10:33 AM
> To: ccielab@groupstudy.com
> Subject: FRTS
>
>
>
> "When the map class is defined, apply it to the PVC with the frame-relay
> class
> class_name command,"
> How to do this if you have Serial 0/0.1 multipoint and here live 2 pvc.
How
> to
> apply for one pvc in case on multipoing??
>
> Thank you...
> Volodymyr
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:25 GMT-3