From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Sep 05 2003 - 14:11:23 GMT-3
Roger,
To see which specific traffic is causing the DDR link to dial,
'debug dialer packets'. Assuming you're talking about DLSw+ with TCP
encap and no prioritization, it's TCP port 2065. Whether it's source or
destination depends on the direction of travel.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Roger McNeace
Sent: Friday, September 05, 2003 12:01 PM
To: 'ccielab@groupstudy.com'
Subject: DSLW with OSPF demand-ciruit
What needs to be configured to prevent DLSW from brining up an ISDN
circuit
when using OSPF demand circuit.
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:23 GMT-3