From: navaid@rogers.com
Date: Fri Sep 05 2003 - 10:02:46 GMT-3
Bob,
Following is output of show version. I am using "c3550-i5q3l2-mz.121-12c.EA1.bin".I don't see vtp and vlan command in config.
Thanks,
Navaid
switch1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(12c)EA1, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 25-Nov-02 00:07 by antonino
Image text-base: 0x00003000, data-base: 0x0075FE48
ROM: Bootstrap program is C3550 boot loader
switch1 uptime is 1 day, 32 minutes
System returned to ROM by power-on
System restarted at 18:30:52 CST Sat Feb 27 1993
System image file is "flash:c3550-i5q3l2-mz.121-12c.EA1.bin"
cisco WS-C3550-24 (PowerPC) processor (revision G0) with 65526K/8192K bytes of m
emory.
Processor board ID CAT0642X0FE
Last reset from warm-reset
Bridging software.
Running Layer2/3 Switching Image
Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface
Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
The password-recovery mechanism is enabled.
384K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0B:46:97:C5:00
Motherboard assembly number: 73-5700-09
Power supply part number: 34-0966-02
Motherboard serial number: CAT0641052J
Power supply serial number: DCA063814VT
Model revision number: G0
Motherboard revision number: A0
Model number: WS-C3550-24-SMI
System serial number: CAT0642X0FE
Configuration register is 0x10F
>
> From: "Bob Sinclair" <bsin@cox.net>
> Date: 2003/09/02 Tue PM 06:18:18 EDT
> To: <navaid@rogers.com>
> Subject: RE: vlan & vtp configs on 3550
>
> Colleagues,
>
> I am running c3550-i5q3l2-mz.121-11.EA1 on my 3550, and it does save all of
> the vlan configuration info in the running configuration, as you see below.
> Seems to me I would not need the vlan.dat file here. Is this not what you
> are seeing?
>
> -Bob Sinclair
> CCIE #10427
>
>
> SNIPPED >
>
> hostname c3550
> !
> aaa new-model
> aaa authentication dot1x default group radius
> enable secret 5 $1$sKSC$eCJMNPxKH/jbLY6zikbj6/
> enable password 7 060506324F41
> !
> clock timezone EST -5
> clock summer-time EDT recurring
> !
> vlan 22
> !
> vlan 23
> !
> vlan 24
> !
> vlan 25
> ip subnet-zero
> ip domain-name nff.com
> ip name-server 192.168.0.6
> !
> dot1x timeout quiet-period 10
> vtp domain cisco
> vtp mode transparent
> !
> !
> spanning-tree extend system-id
> spanning-tree uplinkfast
> spanning-tree backbonefast
> !
> !
>
>
>
>
> -------------------------------------------------------------------------
> FIGHT BACK AGAINST SPAM!
> Download Spam Inspector, the Award Winning Anti-Spam Filter
> http://mail.giantcompany.com
>
>
> ----- Original Message -----
> From: <navaid@rogers.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, September 02, 2003 2:53 PM
> Subject: RE: RE: vlan & vtp configs on 3550
>
>
> > So it means that this config will not be saved when you save runing config
> to a tftp server and you have to save vlan database separately.
> >
> > Naviad
> >
> > >
> > > From: "Wright, Jeremy" <wright@admworld.com>
> > > Date: 2003/09/02 Tue PM 02:40:07 EDT
> > > To: "'navaid@rogers.com'" <navaid@rogers.com>
> > > Subject: RE: RE: vlan & vtp configs on 3550
> > >
> > > it wont show in sh run.....
> > >
> > > -----Original Message-----
> > > From: navaid@rogers.com [mailto:navaid@rogers.com]
> > > Sent: Tuesday, September 02, 2003 1:37 PM
> > > To: ccielab@groupstudy.com
> > > Subject: Re: RE: vlan & vtp configs on 3550
> > >
> > >
> > > Jeremy,
> > > Thanks for reply.
> > > I am using following commands to configure vlan and vtp but I dont see
> it in "sh run".
> > >
> > > vlan 10
> > > name VLAN10
> > > vtp mode transparent
> > > vtp domain test
> > > vtp password testing
> > > vtp version 2.
> > >
> > > Thanks,
> > >
> > > Navaid
> > >
> > >
> > >
> > > >
> > > > From: "Wright, Jeremy" <wright@admworld.com>
> > > > Date: 2003/09/02 Tue PM 01:51:26 EDT
> > > > To: "'navaid@rogers.com'" <navaid@rogers.com>
> > > > Subject: RE: vlan & vtp configs on 3550
> > > >
> > > > show vtp status
> > > > show vlan brief
> > > >
> > > > -----Original Message-----
> > > > From: navaid@rogers.com [mailto:navaid@rogers.com]
> > > > Sent: Tuesday, September 02, 2003 12:49 PM
> > > > To: ccielab@groupstudy.com
> > > > Subject: vlan & vtp configs on 3550
> > > >
> > > >
> > > > I have noticed that vlan and vtp configs are not present in output of
> "sh run". May be because it is stored in a separate database.
> > > > When using Cat6500 series switchs in hybrid mode I can see everyting
> under "sh config" which is great.
> > > >
> > > > So, question is: When using 3550, how do I see what commands are used
> to configure vlans ?
> > > >
> > > > Thanks,
> > > >
> > > > Navaid
> > > >
> > > >
> > >
> > > 1
> > >
> > >
> > > _______________________________________________________________________
> > > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > > CONFIDENTIALITY NOTICE:
> > > This message is intended for the use of the individual or entity to
> which it is addressed and may contain information that is privileged,
> confidential and exempt from disclosure under applicable law. If the reader
> of this message is not the intended recipient or the employee or agent
> responsible for delivering this message to the intended recipient, you are
> hereby notified that any dissemination, distribution or copying of this
> communication is strictly prohibited.
> > > If you have received this communication in error, please notify us
> immediately by email reply or by telephone and immediately delete this
> message and any attachments. In the U.S. call us toll free at (800)
> 637-5843.
> > > Spanish, French, Quebecois French, Portuguese, Polish, German, Dutch,
> Turkish, Russian, Japanese and Chinese:
> http://www.admworld.com/confidentiality.htm.
> > >
> > >
> > >
> >
> > 1
> >
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
1
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:23 GMT-3