From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Sep 04 2003 - 14:17:38 GMT-3
Meng,
Why not just put two static default routes? With CEF you can
load balance between these routes on a per-packet or per-destination
basis.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
zhang-meng
Sent: Thursday, September 04, 2003 4:02 AM
To: Ccielab (E-mail)
Subject: Cisco 6506 and BGP problem
Hi: Group
A problem, I want to use 6506 (with layer 3 function) to connect
with
two ISP(using two 1000BaseT port) load balance, but Tel can't support
BGP,
they worried statibility.
What kinds of solution and Could you give some suggestion and
design.
Regards
Meng Zhang
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:23 GMT-3