From: Alec (clapun@graduate.hku.hk)
Date: Thu Sep 04 2003 - 00:14:12 GMT-3
thanks Brian. If I have the following dial-peer voice command, which one
will be used after I pressed
1) "1"
2) "12"
3) "123"
in a real phone and csim ? Thanks.
dial-peer voice 1 voip
destination-pattern 1
session target ipv4:10.0.0.1
!
dial-peer voice 2 voip
destination-pattern 12
session target ipv4:10.0.0.1
!
dial-peer voice 3 voip
destination-pattern .
session target ipv4:20.0.0.2
!
dial-peer voice 4 voip
destination-pattern .T
session target ipv4:20.0.0.2
----- Original Message -----
From: "Brian McGahan" <bmcgahan@internetworkexpert.com>
To: "'Alec'" <clapun@graduate.hku.hk>; "'Paul Chen'"
<cpjchen@starhub.net.sg>; <ccielab@groupstudy.com>
Sent: Thursday, September 04, 2003 2:20 AM
Subject: RE: Destination pattern symbols
> Alec,
>
> It will only match a single character then. As soon as the
> single character is input, the router will do call setup. This will not
> be true for the 'csim start' command though, since the string is sent
> all at once. From an actual phone though, the string is sent 1
> character at a time.
>
> HTH
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-334-8987
> Direct: 708-362-1418 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: Alec [mailto:clapun@graduate.hku.hk]
> Sent: Wednesday, September 03, 2003 10:24 AM
> To: Brian McGahan; 'Paul Chen'; ccielab@groupstudy.com
> Subject: Re: Destination pattern symbols
>
> So what if I use destination-pattern . for voice default route ? What's
> the
> difference with .T ?
>
> ----- Original Message -----
> From: "Brian McGahan" <bmcgahan@internetworkexpert.com>
> To: "'Paul Chen'" <cpjchen@starhub.net.sg>; <ccielab@groupstudy.com>
> Sent: Wednesday, September 03, 2003 4:22 PM
> Subject: RE: Destination pattern symbols
>
>
> > Paul,
> >
> > T actually means interdigit timeout. The default interdigit
> > timeout is 10 seconds. Each time you dial a digit, the router is
> going
> > to wait 10 seconds before doing call setup. After 10 seconds have
> > expired, the router assumes that what you have entered so far is the
> > complete dial string, and does call setup on those digits. You can
> > modify the interdigit timeout with the voice-port command 'timeouts
> > inter-digit'.
> >
> > The combination of the . (any single character) and the T (wait
> > for additional characters) effectively defines a default route for
> > voice.
> >
> >
> > HTH,
> >
> > Brian McGahan, CCIE #8593
> > bmcgahan@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-334-8987
> > Direct: 708-362-1418 (Outside the US and Canada)
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Paul Chen
> > Sent: Wednesday, September 03, 2003 3:05 AM
> > To: ccielab@groupstudy.com
> > Subject: Destination pattern symbols
> >
> > Hi,
> >
> >
> >
> > Could someone please explain to me what these symbols mean:
> >
> >
> >
> > Destination-pattern .T
> >
> >
> >
> > A dot implies a single character right ?
> >
> >
> >
> > The T symbol implies a variable length dial string.
> >
> >
> >
> > Does the combination of the 2 symbols mean dial any number ?
> >
> >
> >
> > Thanks.
> >
> > Paul
> >
> >
> >
> _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:22 GMT-3