From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Sep 03 2003 - 05:22:45 GMT-3
Paul,
T actually means interdigit timeout. The default interdigit
timeout is 10 seconds. Each time you dial a digit, the router is going
to wait 10 seconds before doing call setup. After 10 seconds have
expired, the router assumes that what you have entered so far is the
complete dial string, and does call setup on those digits. You can
modify the interdigit timeout with the voice-port command 'timeouts
inter-digit'.
The combination of the . (any single character) and the T (wait
for additional characters) effectively defines a default route for
voice.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Paul Chen
Sent: Wednesday, September 03, 2003 3:05 AM
To: ccielab@groupstudy.com
Subject: Destination pattern symbols
Hi,
Could someone please explain to me what these symbols mean:
Destination-pattern .T
A dot implies a single character right ?
The T symbol implies a variable length dial string.
Does the combination of the 2 symbols mean dial any number ?
Thanks.
Paul
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:22 GMT-3