From: Snow, Tim (timothy.snow@eds.com)
Date: Wed Sep 03 2003 - 05:19:05 GMT-3
I believe that with frame the hub needs to have an ip address of either .1
or .2 whereas that restriction isn't there for HDLC. Also, try it without a
subinterface and don't forget to use a frame map on the hub and I think
you'll be able to get it work.
BTW, I think there is a good example in the documentation.
Tim
#12042
-----Original Message-----
From: benmekki kamal [mailto:benmekki_kamal@yahoo.fr]
Sent: Wednesday, September 03, 2003 4:00 AM
To: ccielab@groupstudy.com
Subject: autoinstall over framerelay
Hello Guys,
How can we configure autoinstall over frame-relay ?
The question state that we have to add a new subinterface on router A, then
configure the sub-interface for frame-relay PVC XXX in order to configure a
new installed router on the frame-relay cloud.
I have added a ip helper address <tftp-server-add> on the sub interface, but
I m not sure that I don't miss anything else.
When using HDLC the configuration is okay, but on frame-relay I'm not sure ?
Any Idea
Thank a lot for help
Kamal
---------------------------------
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en frangais !
Testez le nouveau Yahoo! Mail
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:22 GMT-3