From: Chen Kwong Wai William (kwchen@netvigator.com)
Date: Tue Sep 02 2003 - 11:09:40 GMT-3
----- Original Message -----
From: "Chen Kwong Wai William" <kwchen@netvigator.com>
To: "Cristian Henry H" <chenry@reuna.cl>
Sent: Tuesday, September 02, 2003 10:09 PM
Subject: Re: IP PIM Auto-RP interface
> Just try a lab, and it works if I use this command
>
> ip pim send-rp-announce lo0 scope 16
>
> But failed, when I use
>
> ip pim send-rp announce s0/0.100 scope 16.
>
> I use "ping" and "sh ip pim rp" to verify.
>
> Both interface is enable with "ip pim sparse-dense-mode"
>
> --- William
>
> ----- Original Message -----
> From: "Cristian Henry H" <chenry@reuna.cl>
> To: "Chen Kwong Wai William" <kwchen@netvigator.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Tuesday, September 02, 2003 10:02 PM
> Subject: Re: IP PIM Auto-RP interface
>
>
> > Why not?
> >
> > Chen Kwong Wai William ha escrito:
> > >
> > > Dear all,
> > >
> > > Just to confirm if NBMA interface cannot be the interface of
auto-rp
> > > announcement interface or discovery-agent's interface?
> > >
> > > Best Regards,
> > > William
> > >
> > >
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:21 GMT-3