From: Alec (clapun@graduate.hku.hk)
Date: Tue Sep 02 2003 - 09:08:22 GMT-3
Hi group,
I came across an example from IP Expert v2.1 that does not enable FRTS in
the serial major interface but binded a map-class in the serial subif.
Isn't it an invalid configuration as I don't think the voice class has taken
effect ??
Any advice please.
rgds,
alec
interface Serial0
no ip address
encapsulation frame-relay
no ip mroute-cache
no frame-relay inverse-arp
frame-relay lmi-type cisco
!
interface Serial0.24 point-to-point
ip address 150.50.24.2 255.255.255.0
no ip mroute-cache
frame-relay interface-dlci 104
class voice <-------------
frame-relay ip rtp header-compression
!
map-class frame-relay voice
frame-relay cir 128000
frame-relay bc 300
no frame-relay adaptive-shaping
!
R2#show fram pvc 104
PVC Statistics for interface Serial0 (Frame Relay DTE)
DLCI = 104, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0.24
input pkts 16942 output pkts 23803 in bytes 1273098
out bytes 3188357 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 19465 out bcast bytes 2941020
pvc create time 4d22h, last time pvc status changed 4d22h
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:21 GMT-3