From: shenkerjp (shenkerjp@yahoo.co.jp)
Date: Tue Sep 02 2003 - 02:26:17 GMT-3
Thank you for reply.
I am thinking to set up home lab as following
Provider Edge router(PE) x2
Provider router(P) x2
CE router
MBGP and OSPF run between PE routers and
OSPF run between P and PE.
Static,BGP will be using between PE and CE router.
Does 2600 or 4500M router support under above
environment?
> I read somewhere that you can even run MPLS on 2500
> and there is a code/IOS
> for 2500. Of course 2600 can run MPLS but you must
> consider what are the
> things that you will turn on. You wouldn't want to
> run BGP, OSPF, etc on a
> 2600 with IP CEF and tag-switching/label-switching
> turned on.
>
> 2600 will be ideal for CE. I am not quite sure what
> are the things that you
> will do in a MPLS home lab. We do not usually use
> 2600 in a live network for
> PE or P routers.
>
> Please correct me if I am wrong
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> shenkerjp@yahoo.co.jp
> Sent: Monday, September 01, 2003 7:36 PM
> To: ccielab@groupstudy.com
> Subject: What is the minimum HW requrement to run
> MPLS
>
>
> ALL
>
>
> I would like to bulid MPLS network at my home lab.
> Does anyone know what minimum HW to run MPLS?
>
> MPLS can run on 2600 router?
>
>
>
> Regards,
>
>
> Tim
> __________________________________________________
> Do You Yahoo!?
> Yahoo! BB is Broadband by Yahoo!
> http://bb.yahoo.co.jp/
>
>
>
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:21 GMT-3