From: William Lijewski (ccie8642@hotmail.com)
Date: Sat Aug 30 2003 - 01:28:06 GMT-3
Yep, it works just like a 3550, except its strictly layer two on the
physical interfaces. You can't turn off switchport. All that means is that
you must use SVI's on the switch module for the 3700's if you want to add
layer three for a VLAN.
William Lijewski
CCIE #8642
>From: "ccie2be" <ccie2be@nyc.rr.com>
>To: "William Lijewski" <ccie8642@hotmail.com>
>Subject: Re: Cat 3550's in lab
>Date: Fri, 29 Aug 2003 22:50:16 -0400
>
>Hi William,
>
>Before I get all nervous, would a switch mod in the 3700 make it behave
>like
>a 3550?
>
>Thanks, dt
>
>----- Original Message -----
>From: "William Lijewski" <ccie8642@hotmail.com>
>To: <ccie2be@nyc.rr.com>
>Cc: <ccielab@groupstudy.com>
>Sent: Friday, August 29, 2003 7:30 PM
>Subject: Re: Cat 3550's in lab
>
>
> > As long as you know how to do it, you should be fine. Its always seems
>to
> > work out that the one thing that someone hates, or didn't bother to
>learn,
> > or doesn't understand, is the one thing they get on the lab...
> >
> > I'm just really curious if they will put the switch module in the 3700
>for
> > the R&S exam. That would make switching more interesting - transparent
> > modes and such :)
> >
> >
> > William Lijewski
> > CCIE #8642
> >
> >
> > >From: "ccie2be" <ccie2be@nyc.rr.com>
> > >To: "William Lijewski" <ccie8642@hotmail.com>
> > >Subject: Re: Cat 3550's in lab
> > >Date: Fri, 29 Aug 2003 18:15:46 -0400
> > >
> > >Hi Bill,
> > >
> > >Yeah, I agree. In fact, it's possible to have to configure a layer 3
> > >etherchannel even if the Cat's aren't back to back. I could easily
>imagine
> > >Cisco asking that we configure an Etherchannel between a Cat and a
>router.
> > >
> > >The question behind the question had to do with configuring vlan load
> > >balancing over 2 parallel links running between 2 Cat's connected back
>to
> > >back. I can do that if I had to but I'm hoping that won't be
>necessary.
>dt
> > >
> > >----- Original Message -----
> > >From: "William Lijewski" <ccie8642@hotmail.com>
> > >To: <ccie2be@nyc.rr.com>; <ccielab@groupstudy.com>
> > >Sent: Friday, August 29, 2003 5:53 PM
> > >Subject: Re: Cat 3550's in lab
> > >
> > >
> > > > I would know how to do layer 2 and layer 3 Etherchannels if that was
> > >your
> > > > question :)
> > > >
> > > > William Lijewski
> > > > CCIE #8642
> > > >
> > > >
> > > > >From: "ccie2be" <ccie2be@nyc.rr.com>
> > > > >Reply-To: "ccie2be" <ccie2be@nyc.rr.com>
> > > > >To: "Group Study" <ccielab@groupstudy.com>
> > > > >Subject: Cat 3550's in lab
> > > > >Date: Fri, 29 Aug 2003 17:46:10 -0400
> > > > >
> > > > >Hi all,
> > > > >
> > > > >Does anybody know whether the 2 Cat 3550 in the lab are connected
>back
> > >to
> > > > >back?
> > > > >
> > > > >Thanks in advance, dt
> > > > >
> > > > >
> > > >
> >_______________________________________________________________________
> > > > >You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > > > >
> > > > >Subscription information may be found at:
> > > > >http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > > _________________________________________________________________
> > > > Help protect your PC: Get a free online virus scan at McAfee.com.
> > > > http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
> > > >
> > >
> >
> > _________________________________________________________________
> > Enter for your chance to IM with Bon Jovi, Seal, Bow Wow, or Mary J
>Blige
> > using MSN Messenger http://entertainment.msn.com/imastar
> >
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:10 GMT-3