From: Gary Bartlett (gary.bartlett@consultant.com)
Date: Fri Aug 29 2003 - 03:49:23 GMT-3
Very simple configuration... "ip irdp ?" should give you a good clue to just about any config they might ask you on. Not to sure on verification, sh ip irdp, but to make sure the clients are using the right default gateway, I think the only way is to check the arp table on a client machine
Int Fa0.45
ip irdp
ip irdp multicast
ip irdp preference 1000
----- Original Message -----
From: "Howard C. Berkowitz" <hcb@gettcomm.com>
Date: Thu, 28 Aug 2003 23:17:00 -0400
To: <ccielab@groupstudy.com>
Subject: Re: irdp and hsrp
> At 10:59 AM +0800 8/29/03, David zhao wrote:
> >hi all
> > what is the different between irdp and hsrp.
>
> One of the fundamental differences is that IRDP normally runs between
> hosts and routers, while HSRP runs between routers. They are both
> well documented on CCO and have RFCs.
>
> >how to config irdp and verify the irdp configuratipn .
> >thx for your kind reply.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
--
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:09 GMT-3