From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu Aug 28 2003 - 17:01:57 GMT-3
By looking at your show version it appears you've tried to install the
VIC-2FXS in the NM-1E1R2W. You need a NM-1V or NM-2V.
Understanding Foreign Exchange Station (FXS) Voice Interface Cards
http://www.cisco.com/warp/public/788/products/2fxs_vic.html
Understanding NM-1V and NM-2V Voice Network Modules
http://www.cisco.com/warp/public/788/products/hw_voice_net.html
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-334-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Charles T. Alexander
Sent: Thursday, August 28, 2003 12:51 PM
To: ccielab@groupstudy.com
Subject: FXS on 3620
I bought 2 VIC2-2FXS cards for two 3620 routers. I put them in, the
lights turn amber. They don't show up in the show hardware. I
reinstalled the latest 12.1 image since I don't have enough memory for
12.2. Each is in the right most top slot. I've looked Cisco web site
and archives can't find what I am doing wrong.
r5#sho ha
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-JS-M), Version 12.1(20), RELEASE SOFTWARE
(fc2)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 29-May-03 19:51 by kellythw
Image text-base: 0x60008940, data-base: 0x6128E000
ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT
RELEASE
SOFTWARE (fc2)
r5 uptime is 3 hours, 35 minutes
System returned to ROM by reload at 18:29:08 EST Mon Mar 1 1993
System image file is "flash:c3620-js-mz.121-20"
cisco 3620 (R4700) processor (revision 0x81) with 45056K/4096K bytes of
memory.
Processor board ID 07125569
R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
4 Serial network interface(s)
1 ISDN Basic Rate interface(s)
DRAM configuration is 32 bits wide with parity disabled.
29K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
r5#
r5#show fla
System flash directory:
File Length Name/status
1 10509776 c3620-js-mz.121-20
[10509840 bytes used, 6267376 available, 16777216 total]
16384K bytes of processor board System flash (Read/Write)
r5#show run
Building configuration...
Current configuration : 2673 bytes
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r5
!
logging buffered 10000 debugging
enable password radnor
!
username r2 password 0 ctasta
username r2x password 0 ctasta
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
isdn switch-type basic-ni
cns event-service server
!
!
!
!
!
interface Loopback0
ip address 192.168.5.5 255.255.255.255
!
interface BRI0/0
ip address 172.29.25.5 255.255.255.0
encapsulation ppp
dialer map ip 172.29.25.2 name r2x broadcast 4081111111
dialer-group 1
isdn switch-type basic-ni
isdn spid1 40822222221
isdn spid2 40822222222
no cdp enable
ppp authentication chap
!
interface Ethernet0/0
ip address 10.29.200.5 255.255.255.0 secondary
ip address 172.29.200.5 255.255.255.128
no ip redirects
ip ospf message-digest-key 1 md5 ctasta
standby 1 ip 172.29.200.2
standby 1 preempt
standby 2 ip 10.29.200.2
!
interface TokenRing0/0
no ip address
shutdown
ring-speed 16
!
interface Serial1/0
ip address 172.29.100.5 255.255.255.248
encapsulation frame-relay
ip ospf message-digest-key 1 md5 ctasta
ip ospf priority 0
serial restart-delay 0
frame-relay map ip 172.29.100.2 501 broadcast
frame-relay map ip 172.29.100.5 501
frame-relay map ip 172.29.100.6 501 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
!
interface Serial1/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial1/3
no ip address
shutdown
serial restart-delay 0
!
router ospf 1
router-id 192.168.5.5
log-adjacency-changes
area 0 authentication message-digest
area 0 range 172.29.200.0 255.255.255.0
network 172.29.100.0 0.0.0.7 area 0
network 172.29.200.0 0.0.0.127 area 0
network 192.168.5.5 0.0.0.0 area 5
!
router bgp 5
no synchronization
bgp log-neighbor-changes
neighbor 192.168.2.2 remote-as 12
neighbor 192.168.2.2 ebgp-multihop 5
neighbor 192.168.2.2 update-source Loopback0
neighbor 192.168.6.6 remote-as 6
neighbor 192.168.6.6 ebgp-multihop 5
neighbor 192.168.6.6 update-source Loopback0
neighbor 192.168.7.7 remote-as 78
neighbor 192.168.7.7 ebgp-multihop 5
neighbor 192.168.7.7 update-source Loopback0
no auto-summary
!
ip classless
no ip http server
!
dialer-list 1 protocol ip permit
!
alias exec i show ip route
alias exec r show run
alias exec c config t
alias exec u undebug all
alias exec b show ip bgp
alias exec bs show ip bgp sum
alias exec s show ip int brief
!
line con 0
exec-timeout 0 0
logging synchronous
escape-character 27
line aux 0
line vty 0 4
exec-timeout 0 0
password bp
login
!
end
r5#
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:09 GMT-3