From: Micah Byers (micah@myvine.com)
Date: Thu Aug 28 2003 - 12:39:57 GMT-3
Waheed,
Make sure that you do not have any spaces on the end of your key chain
name under the interface. Unlike most commands IOS does not remove white
spaces if you add them for this command, even if you hit a space and put a
question mark, that space will remain. If you are using SecureCRT you can
highlight that whole line and it will show you if there is an extra space or
not. Other than that we would need to see your configs to make sure you set
it up right.
Micah J. Byers- CCIE #12079
----- Original Message -----
From: "Waheed Mir" <ccnp2ccie@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, August 28, 2003 1:09 AM
Subject: MD5 authentication over EIGRP Domain
> Hi,
> i loose routes when i put secured method of updates across EIGRP domain. I
have it all working before putting authentication.
>
> No issue with authen configuration or key-string mismatch.
>
> Has anybody noticed such behaviour??
>
> -thanx
> -Waheed
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:09 GMT-3